Dell SwitchX M4001F 사용자 설명서 - 페이지 16

{카테고리_이름} Dell SwitchX M4001F에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell SwitchX M4001F 27 페이지. Infiniband blade switch i/o module for poweredge m-series

페이지 인쇄

1. I2C Interface Rj-45 Connector

Rev 1.2

Cluster Management and Firmware

3.1

Network Management and Clustering Software

Download and install, on all nodes, the Mellanox OpenFabric software package for Linux, Windows, or

other operating systems from the Mellanox software website:

http://www.mellanox.com

This software package provides connectivity for server and storage systems utilizing High Perfor-

mance Computing (HPC) or enterprise data center (EDC) applications across an InfiniBand fabric.

It also provides a Subnet Manager for simple network configuration, network administration, and

diagnostic tools for network management.

3.2

Updating Firmware

The switch is delivered with the latest Firmware available at the time of production. New firmware

versions will be posted on the Mellanox firmware download page. Firmware can be updated in-

band using the Mellanox Firmware Tools (MFT).

You will need the Mellanox Firmware Tools package available in MLNX_OFED to update firm-

ware for this switch. It also can be downloaded from:

http://www.mellanox.com

The latest firmware can be found at:

http://www.mellanox.com

3.2.1 Instructions for Reprogramming Over the InfiniBand Network

To reprogram the switch see

for the latest firmware and the burning instructions.

Mellanox Technologies

>Downloads > InfiniBand SW/Drivers.

> Downloads > Firmware Tools.

> Support > Dell.

http://mellanox.com/content/pages.php?pg=firmware_table_dell

Cluster Management and Firmware