Dell Z9100-ON 설치 매뉴얼 - 페이지 36

{카테고리_이름} Dell Z9100-ON에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Z9100-ON 45 페이지. Open networking
Dell Z9100-ON에 대해서도 마찬가지입니다: 설치 매뉴얼 (43 페이지), 설치 매뉴얼 (45 페이지)

페이지 인쇄

1. Port Connectivity

Units = cylinders of 2048 * 512 = 1048576 bytes

Device Boot

Mount the device /dev/sdb to the /mnt/usb directory.

ONIE:/ # mount -t vfat /dev/sdb /mnt/usb

NOTE:

The following message displays if the /mnt/usb directory is missing: mount: mounting /dev/sdb

on /mnt/usb failed: No such file or directory.

NOTE:

The following message displays if the USB device is not seen: mount: mounting /dev/sdb on /mnt/usb

failed: No such device or address.

Add a device to the file systems table (fstab) and mount the file systems—recommended.

ONIE:/ # vi /etc/fstab

# FSTAB entry for the ONIE-BOOT partition mounted on /boot

LABEL=ONIE-BOOT /mnt/onie-boot ext4

/dev/sdb

ONIE:/ # mount -a

Before you install an OS

After powering on the Z9100-ON system, it goes through a power-on self-test (POST).

POST runs every time the switch is initialized and checks the hardware components to determine if the switch is fully operational before

booting. After POST, the system uses the Grub bootloader.

To select an entry, use the up and down arrow keys. Press Enter to select an OS or enter e to edit the commands before booting. Enter c

for a command line. The selected entry runs automatically in the operating system.

Example of the Grub bootloader

GNU GRUB

version 2.02~beta2+e4a1fe391

+-------------------------------------------+

|*ONIE: Install OS

| ONIE: Rescue

| ONIE: Uninstall OS

| ONIE: Update ONIE

| ONIE: Embed ONIE

| ONIE: Diag ONIE

+-------------------------------------------+

Your system comes with ONIE installed.

Example of ONIE

ONIE: Install OS

For downloading and installing an OS from a URL

Starts ONIE with ONIE Discovery Service

(factory default boot)

ONIE: Rescue

Starts ONIE without ONIE Discovery Service

Useful for running Diagnostics manually

ONIE: Uninstall OS

Restore to factory defaults erases any installed OS

ONIE: Update ONIE

Management ports

Start

End

/mnt/usb

vfat

Blocks

Id System

defaults,rw,errors=remount-ro 0

defaults