Dell Z9100-ON 설치 매뉴얼 - 페이지 32
{카테고리_이름} Dell Z9100-ON에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Z9100-ON 43 페이지. Open networking
Dell Z9100-ON에 대해서도 마찬가지입니다: 설치 매뉴얼 (45 페이지), 설치 매뉴얼 (45 페이지)
페이지 인쇄
For internal storage:
Disk /dev/sda: 15.8 GB, 15829303296 bytes
255 heads, 63 sectors/track, 1924 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot
/dev/sda1
For USB storage:
Disk /dev/sdb: 30.9 GB, 30942946304 bytes
64 heads, 32 sectors/track, 29509 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Device Boot
3.
Mount the device /dev/sdb to the /mnt/usb directory.
ONIE:/ # mount -t vfat /dev/sdb /mnt/usb
NOTE: The following message displays if the /mnt/usb directory is missing: mount:
mounting /dev/sdb on /mnt/usb failed: No such file or directory.
NOTE: The following message displays if the USB device is not seen: mount:
mounting /dev/sdb on /mnt/usb failed: No such device or address.
4.
OPTIONAL: Add a device to the file systems table (fstab) and mount the file systems.
ONIE:/ # vi /etc/fstab
# FSTAB entry for the ONIE-BOOT partition mounted on /boot
LABEL=ONIE-BOOT /mnt/onie-boot ext4
0
1
/dev/sdb
0
1
ONIE:/ # mount -a
Before You Install an Operating System on the Z9100-ON
System
After powering on the Z9100-ON system, it goes through a power-on self-test (POST).
POST runs every time the switch is initialized and checks the hardware components to determine if the
switch is fully operational before booting. After POST, the system uses the Grub bootloader.
To select which entry is highlighted, use the up and down arrow keys. Press Enter to select an OS or
enter e to edit the commands before booting. Enter c for a command line. The highlighted entry runs
automatically in the operating system.
ATTENTION REVIEWERS:
Is this output still correct?
Example of the Grub Bootloader
GNU GRUB
version 2.02~beta2+e4a1fe391
+----------------------------------------------------------------------------+
|*ONIE: Install OS
32
Start
1
1925
Start
/mnt/usb
vfat
End
Blocks
Id System
15458303+ ee EFI GPT
End
Blocks
Id System
defaults,rw,errors=remount-ro
defaults
|
Management Ports