Dell 540s - Studio Slim Desktop Pc 서비스 매뉴얼 - 페이지 4

{카테고리_이름} Dell 540s - Studio Slim Desktop Pc에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell 540s - Studio Slim Desktop Pc 38 페이지. Service manual

Back to Contents Page

Replacing the Support Bracket

Dell Studio™ Slim 540s Service Manual

CAUTION:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

1. Follow the procedures in

Before You

2. Remove the computer cover (see

support bracket

card retention release lever

3. Release the card retention bracket by lifting the card retention release lever up.

4. Remove any cable(s) attached to the support bracket.

5. Pivot the support bracket and lift it off the hinge tabs.

6. To replace the support bracket, align and insert the hinges at the bottom of the support bracket into the hinge tabs located along the edge of the

computer.

7. Pivot the support bracket downward.

8. Align the notch in the support bracket with the slot in the hard drive bay and press it down.

9. Replace any cable(s) that were attached to the support bracket.

10. Ensure that the support bracket is seated correctly and then replace the card retention bracket.

11. Replace the computer cover (see

Back to Contents Page

Begin.

Replacing the Computer

Cover).

card retention bracket

Replacing the Computer

Cover).