Dell 5530 Mono Laser 설정 및 사양 - 페이지 24

{카테고리_이름} Dell 5530 Mono Laser에 대한 설정 및 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell 5530 Mono Laser 29 페이지. Loading paper and specialty media
Dell 5530 Mono Laser에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (2 페이지), 서비스 매뉴얼 (46 페이지), 설정 및 사양 매뉴얼 (29 페이지)

페이지 인쇄

Updating the BIOS from the F12 One-Time boot menu

Update your computer BIOS using the BIOS update.exe file that is copied to a FAT32 USB drive and booting from the F12

One-Time boot menu.

CAUTION:

If BitLocker is not suspended before updating the BIOS, the next time you reboot the system it

will not recognize the BitLocker key. You will then be prompted to enter the recovery key to progress and the

system will ask for this on each reboot. If the recovery key is not known this can result in data loss or an

unnecessary operating system re-install. For more information on this subject, see Knowledge Article:

www.dell.com/support/article/sln153694

BIOS Update

You can run the BIOS update file from Windows using a bootable USB drive or you can also update the BIOS from the F12

One-Time boot menu on the computer.

Most of the Dell computers built after 2012 have this capability, and you can confirm by booting your computer to the F12

One-Time Boot Menu to see if BIOS FLASH UPDATE is listed as a boot option for your computer. If the option is listed, then the

BIOS supports this BIOS update option.

NOTE:

Only computers with BIOS Flash Update option in the F12 One-Time boot menu can use this function.

Updating from the One-Time boot menu

To update your BIOS from the F12 One-Time boot menu, you need the following:

● USB drive formatted to the FAT32 file system (key does not have to be bootable)

● BIOS executable file that you downloaded from the Dell Support website and copied to the root of the USB drive

● AC power adapter that is connected to the computer

● Functional computer battery to flash the BIOS

Perform the following steps to perform the BIOS update flash process from the F12 menu:

CAUTION:

Do not turn off the computer during the BIOS update process. The computer may not boot if you turn

off your computer.

1. From a turn off state, insert the USB drive where you copied the flash into a USB port of the computer.

2. Turn on the computer and press F12 to access the One-Time Boot Menu, select BIOS Update using the mouse or arrow keys

then press Enter.

The flash BIOS menu is displayed.

3. Click Flash from file.

4. Select external USB device.

5. Select the file and double-click the flash target file, and then click Submit.

6. Click Update BIOS. The computer restarts to flash the BIOS.

7. The computer will restart after the BIOS update is completed.

System and setup password

Table 28. System and setup password

Password type

System password

Setup password

You can create a system password and a setup password to secure your computer.

CAUTION:

The password features provide a basic level of security for the data on your computer.

CAUTION:

Anyone can access the data that is stored on your computer if it is not locked and left unattended.

BIOS setup

Description

Password that you must enter to log in to your system.

Password that you must enter to access and make changes to

the BIOS settings of your computer.

https://