Dell Inspiron 1110 설치 매뉴얼 - 페이지 16

{카테고리_이름} Dell Inspiron 1110에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Inspiron 1110 48 페이지. Dell inspiron inspiron 11z: specifications
Dell Inspiron 1110에 대해서도 마찬가지입니다: 제품 안전 데이터 시트 (7 페이지), 특징 (2 페이지)

페이지 인쇄

Adjust the paper length and width guides against the print material without bending it.

2. To print a document in Manual Feed mode, you must select Manual Feed for Source from the software application, and then select the appropriate

paper size and type. For details, see

3. Press

on the printer's operator panel to start feeding.

Printing starts.

NOTE:

If you don't press the button after a pause, the paper will be automatically fed into the printer.

4. If you are printing multiple pages, load the next sheet after the first page prints out, and press

Repeat this step for every page to be printed.

Printing on Special Materials

1. Open the paper input tray.

2. Load the print material in the paper input tray. Do not mix types.

3. Adjust the length and width guides against the print material without bending it.

4. To print on special material, you must select Manual Feed for Source from the software application, and then select the appropriate paper size and

type. For details, see

"Paper

5. Press

to start.

See the following directions to load each type of print material.

Load an envelope in the tray with the flap side down and the stamp area on the top left side. The end of the envelope with the stamp area enters

the printer first, from the center of the tray.

NOTICE: Never load envelopes with stamps, clasps, snaps, windows, coated linings, or self-stick adhesives. These envelopes may

severely damage the printer. The stamp is shown in the illustration only for placement.

CAUTION: If you print 20 envelopes in succession, the surface of the top cover may become hot. Please exercise caution.

Load a sheet of labels in the tray with the side to be printed on facing up.

"Paper

Tab".