Dell 5100cn 카트리지 재제조 지침 - 페이지 7
{카테고리_이름} Dell 5100cn에 대한 카트리지 재제조 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell 5100cn 9 페이지. Toner cartridge remanufacturing
페이지 인쇄
19. Place the gearless end cap, in its original positioning, over
the seal and toner fill plug as shown. Make sure that the
remaining seal flap is showing through as shown.
REPLACING THE OEM CHIP
21. Locate the OEM chip housing near the gearless side of the
cartridge.
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
DELL 5100CN TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
20. Push the end cap inward until it is properly secured by all
four locking tabs.
22. Using a small flat head screwdriver, press down on the two
side tabs on the chip housing to release it.
www.uninetimaging.com