Dell S2815dn 설치 및 구성 매뉴얼 - 페이지 11

{카테고리_이름} Dell S2815dn에 대한 설치 및 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell S2815dn 40 페이지. Cacstar smart card reader, document protection for cac/piv enabled multifunction devices
Dell S2815dn에 대해서도 마찬가지입니다: 설정 매뉴얼 (36 페이지), 설정 매뉴얼 (44 페이지), 설정 매뉴얼 (44 페이지)

페이지 인쇄

Step 1 – MFD IP Address

This is the IP address that is used for access to these administrator

web pages. It is also used for host computer connection to the

MFD/printer. This IP address was already set in the initial setup

process using the card reader keypad.

If you wish to change this address, it can be done using this screen or

from the card reader keypad.

Note: When you press the Update button, the CACStar will switch to

the new IP address which will cause your browser to be

disconnected from the CACStar. To reconnect, redirect your browser

to the new IP address you just entered.

Step 2 – NTP Server:

Set this to the Network Time Protocol Server IP address or Server

Name. This will allow the CACStar to validate certificates by date.

If DHCP is in use, you may check the "NTP From DHCP" box to force

retrieval of the NTP Server address from the DHCP server in which

case the address field is not used and may be left blank.

Step 3 – Configure Gateway and DNS Server

Note: A DNS Server is required for OCSP support. It is not necessary

to configure a DNS server if you are not using OCSP.

Set this to the DNS IP address to be used by the CACStar for Domain

Name resolution.

Example: 10.5.1.2

If DHCP is in use, you may check the "DNS From DHCP" box to force

retrieval of DNS addresses from the DHCP server - in which case the

DNS address fields are not used and may be left blank.

CACStar User Guide Rev A27

Page 11