AVYCON CAT7 빠른 시작 매뉴얼 - 페이지 2
{카테고리_이름} AVYCON CAT7에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AVYCON CAT7 2 페이지. Fixed vandal dome camera, 2mp/5mp/8mp ip cameras
AVYCON CAT7에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄Mounting Screw
4. Loosen set screws (pictured below) with included security
wrench.
Adjust the camera to desired angle, then tighten screws and
then place the magnetic ring back onto the camera.
5. Installation complete.
NETWORK CABLE SETUP
1
Drywall Anchors
①
Loosen the nut from the main element.
②
Run the network cable (without RJ45 connector) through both
elements. Then crimp the cable with the RJ45 connector.
③
Connect the cable to the female portion of the waterproof connector,
then tighten the nut and the main cover.
PLEASE CONFIRM THAT VOLTAGE OF POWER SUPPLY USED MATCHES POWER
REQUIRED BY CAMERA, OTHERWISE PERMANENT DAMAGE OR RISK OF FIRE
NETWORK CONNECTION
Set Screws
Network Cable
IPC
① Make sure that the camera and the PC are connected to the local network.
② Install the IP Device Tool from the CD and run it after installation.
Note: DHCP is enabled by default.
③ Camera Activation: Click on the IP address of the camera you want to
activate, which will open that camera's system in your web browser.
Alternatively, if you already know the IP address of your camera, you
can manually enter it into the address bar of your web browser to
reach the same screen.
6
2
3
CAUTION
MAY OCCUR
7
Switch
Network Cable
MENU
Computer
Router
④
The first time you access the camera, you will be prompted to choose
a password that must be between 8 to 15 characters. Once you are
done, click on the 'OK' button to confirm your login information. The
camera is now activated.
⑤ After setting up your credentials, you can access the camera by
logging into the system with the password you just created.
RESOURCES
Need help?
1) Visit www.avycon.com
2) Search for the model number of your product.
3) Click on your product and find appropriate documents on product page.
Technical Support E-mail :
Technical Support Website :
www.avycon.com
US Helpdesk Number :
1 (949) 752-7606
Toll Free Number (Canada) :
1 (888) 833-4611
[M-F, 6am-5pm PST]
NETWORK IP CAMERA
8