AVYCON AVC LHN21SVT-A1S 빠른 시작 매뉴얼 - 페이지 6
{카테고리_이름} AVYCON AVC LHN21SVT-A1S에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AVYCON AVC LHN21SVT-A1S 19 페이지. 2mp auto-tracking ptz bullet camera
페이지 인쇄
3. Secure the camera to the junction box's front cover by using 4 Torx screws and then reinstall
the junction box front cover by place at an angle near 90° to the junction box base
(see diagram below).
4. Adjust the cable's lengths, connect the cables to corresponding ports/interfaces and secure
the tension disc. Close the junction box and tighten screws as the last step. Please remember
to plug the small rubber plug whenever the holes on the rubber plug are not in use.
DIAGRAM
2: Remember to fix the setscrew tightly
4
2MP AUTO-TRACKING PTZ BULLET CAMERA | AVC-LHN21SVT-A1S
Tension Disc
Network Cable
Rubber Plug
Power Cable
DIAGRAM 2
Rubber Plug