Allied Vision Goldeye CL-032 SWIR 빠른 시작 매뉴얼 - 페이지 13

{카테고리_이름} Allied Vision Goldeye CL-032 SWIR에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Vision Goldeye CL-032 SWIR 17 페이지.

Connecting to the host computer

To connect the camera to the host computer, use a Camera Link cable with an

SDR-26 connector for the camera side.

To retrieve information about the required connector type for the frame

grabber (either MDR-26 or SDR-26), refer to the frame grabber manual.

1. Power up the camera and wait until the Camera Link Status LED stops

blinking. This indicates booting has been finished.

2. Launch the Vimba Viewer application and wait for the camera to appear in

the Detected Cameras list. This may take a few seconds, depending on the

number of cameras connected to the PC and the number of installed frame

grabbers.

3. Select the desired camera from Detected Cameras list.

4. A new camera window appears.