3 Rivers Communciations SmartRG SR501 자체 설치 매뉴얼 - 페이지 6

{카테고리_이름} 3 Rivers Communciations SmartRG SR501에 대한 자체 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3 Rivers Communciations SmartRG SR501 9 페이지.

6. The GigaCenter does support WPS button push for wireless connections

a. Check the WPS instructions for your computer or wireless device, Apple does not support WPS

b. Press the WPS button on the GigaCenter

c. Within two minutes, on your computer or wireless device, press its WPS button or follow its

instructions for WPS connections

d. Your computer or wireless device connects to the wireless network

Customize Wireless SSID's and Security settings (These are Optional Settings)

Connect to the GigaCenter and access the EWI (Embedded Web Interface)

1. Confirm the GigaCenter has completed its initial boot-up (about 5-7 minutes)

2. Connect an Ethernet cable between Ethernet port #1 on the back of the GigaCenter and your network

connected PC Ethernet port.

3. From your browser, enter the IP address 192.168.1.1.

4. Locate the default settings label on the GigaCenter or the labels shipped inside the GigaCenter carton and

enter the User Name/Password as shown on the label (two labels are provided).

5. In this Example: User Name: admin and Password: 3f7b1e66

8. Upon entering the appropriate credentials, the main EWI menu is displayed

- 6 -