Allied Vision MANTA 매뉴얼 - 페이지 11
{카테고리_이름} Allied Vision MANTA에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Vision MANTA 18 페이지.
페이지 인쇄Continuing the disassembly
• Keep the camera flipped open as described in step
• The illustrations of the next action steps are schematics.
The front assembly consists of the sensor unit (e) and the lens mount (f).
Figure 15: Front assembly overview: sensor unit and lens mount
6. Remove the two M2 x 10 socket head cap screws (g) and spacers from the sensor unit.
g
Figure 16: Loosening the two M2 x 10 socket head cap screws and spacers
7. With a water resistant ink pen, draw a line (i) across the center top of sensor unit and front assembly.
8. Remove the sensor unit (h) from the lens mount (k).
Figure 17: Removing the sensor unit from the lens mount
e
h
i
Page 11 of 18
Preparing Cameras without
Sensor Cover Glass
5.
f
k