Allied Vision MANTA 매뉴얼 - 페이지 17
{카테고리_이름} Allied Vision MANTA에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Vision MANTA 18 페이지.
페이지 인쇄7. Insert and tighten the four M2 x 10 socket head cap screws at a maximum torque of 4 lbf-in (0.45 Nm).
Figure 31: Inserting the four M2 x 10 socket head cap screws of the front assembly
9.6. Mounting the lens
Damage to the sensor
If you want to use your camera without lens, observe
Damage to sensor and lens
If the lens exceeds maximum protrusion, camera or lens may be damaged.
• To avoid damaging the sensor or the back lens, use lenses with a maximum
• Mount your optics according to the manual of the lens manufacturer and the Prosilica GT User Guide.
9.7. Focus recalibration
Should lens mounts have to be recalibrated for Prosilica GT cameras, follow the instructions in the user
guide.
Prosilica GT User Guide
i
Download the Prosilica GT User Guide from
technical-documentation/prosilica-gt-documentation.
protrusion within camera specifications. For details, see your camera's user
guide.
Page 17 of 18
Preparing Cameras without
NOTICE
3. Safety notes
NOTICE
www.alliedvision.com/en/support/
Sensor Cover Glass
on page 1.