AW Technologies TrachFlush 빠른 매뉴얼

{카테고리_이름} AW Technologies TrachFlush에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AW Technologies TrachFlush 4 페이지.

TrachFlush Quick Guide

How to start up TrachFlush

Power ON / OFF

2 min alarm silence

Actual cuff pressure

Increase cuff pressure

Decrease cuff pressure

Cuff hold button

Cuff pressure unit of measure

Target cuff pressure

Deflate button

Flush button

LED bar

Power Supply

Airway tube

Cuff pressure tube

TrachFlush Start Up

STEP 1: Connect power supply. Press

and hold the ON/OFF button for 3

seconds to turn on the device.

STEP 3: Connect the Airway Tube

and Cuff Pressure Tube to

TrachFlush by twisting them on

STEP 5: Actual cuff pressure is

measured, and the cuff

controller is OFF. See Page 2 on

how to set up cuff pressure.

Page 1 of 4

STEP 2: Calibrate the device by

pressing the

Note: Remove tubes from TrachFlush if

connected

STEP 4: Connect the Airway

Tube to the gas outlet on the

connector or filter, and the

Cuff Pressure Tube to the

pilot balloon