EarthQuake MC43 운영자 매뉴얼 - 페이지 10

{카테고리_이름} EarthQuake MC43에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. EarthQuake MC43 10 페이지. 2-cycle cultivator
EarthQuake MC43에 대해서도 마찬가지입니다: 운영자 매뉴얼 (10 페이지)

페이지 인쇄

DK43 DETHATCHER KIT INSTALLATION (OPTIONAL ACCESSORY)

The Dethatcher Kit is very effective for lifting away the excessive matted layers of thatch that can prevent moisture, oxygen and

nutrients from penetrating the soil and can harbor disease and insects. Use in Spring, Summer, and Fall to bring life and color back

to your lawn.

1. Flip the ON/OFF switch to the OFF position. Remove the cultivating tines and the drag stake (SEE PAGE 12).

2. Unscrew mount bolts/nuts that connect the wheel bracket to the drag stake mount and set wheel bracket aside. SEE FIGURE 11

3. Slide dethatcher shield over the unit's tine shield from the rear of the unit and secure using bolts (176) and nuts (400020).

SEE FIGURE 10

3. Secure the lower part of the dethatcher shield to the drag stake mount using the detent pin (46145).

4. Install wheel extension plate (4676) using additional bolts (46142) and nuts (4650). Make sure wheel extension is facing the right

direction. (The side, with the two holes flush to the edge, connects to the drag stake mount) SEE FIGURE 11

a. With the mount bolts/nuts attach the wheel extension to the drag stake mount.

b. Then with the bracket bolts/nuts (included with the Dethatcher Kit) attach the wheel bracket to the wheel extension.

5. Slide the Left and Right Dethatcher Assemblies onto the tine shaft making sure the Right Assembly is installed on the right side

and Left Assembly is installed on the left side as defined from the user's position. SEE FIGURE 12

6. Secure dethatcher assemblies using the hairpins (4652). The hairpins go through the inner holes of the tine shaft.

NOTE: The drag stake should not be used when using the dethatcher kit.

slide shield

forward

secure with

detent pin

FIGURE 10

right side dethatcher

assembly

FIGURE 12

Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5

bolt

(176)

nut

(400020)

bolt

hairpin

(176)

nut

(400020)

bracket bolts/nuts

(4647/4650)

wheel

bracket

wheel

mount bolts/nuts

extension

(46142/4650)

FIGURE 11

hairpin

tine shaft

Operator's Manual

MC43 2-Cycle Cultivator

drag stake

mount

detent

left side dethatcher

assembly