AWA LT20D 사용자 설명서 - 페이지 12

{카테고리_이름} AWA LT20D에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AWA LT20D 20 페이지. 51 cm tft lcd tv

페이지 인쇄

Setup Setting

AUTO PROGRAM

You can scan the frequency ranges available on your

television in your country and store all the channels found

automatically.

The channels are stored in the order in which they appear

in the frequency bands. It is possible that the automatical-

ly allocated numbers may not correspond to those by

which you wish to identify the channels.

If this is the case, you can then sort them manually.

1. Press the MENU button.

Result : The "PICTURE" menu is displayed.

2. Press the PROG[ ] or PROG[ ] button to select

"SET UP"

3. Press the VOL[ - ] button.

Result :The "SET UP menu is active.

4. Press the PROG[ ] button.

5. Press the VOL[ - ] button.

Result : The "AUTO PROGMAM" menu is active.

6. Press the PROG[ ] button.

7. Press the VOL[ - ] button.

Result: The "START" menu is active.

8. Press the VOL[ - ] button.

Result: The horizontal bar is displayed, and then

channels are stored in an order which reflects

their positions in the frequency range. Finally,

the search will end automatically.

9. When searching and storing is complete,

"AUTO PROGRAM" menu is displayed.

10 Press the PROG[ ] button.

Result: The "Color System" menu is displayed.

11. Press the VOL[ + ] or VOL[ - ] to select the

broadcast color system which you want.

Setup Setting

MANUAL PROGRAM

When storing Channels manually, you can

choose whether or not store each of the channels

found.

The number by which you wish to identify each

stored channel.

1. Press the MENU button.

Result: The "PICTURE" menu is displayed.

2. Press the PROG[ ] or PROG[ ] buttons to

select "SET UP".

3. Press the VOL[ - ] button.

Result: The setup menu is active.

4. Press the PROG[ ] or PROG[ ] button to select

"MANUAL SEARCH".

5. Press the VOL[ - ] button.

Result: The MANUAL SEARCH menu is

active.

6. Press the PROG[ ] or PROG[ ] button to select

Sound System and press the VOL[ - ] button,

pressPROG[ ] or PROG[ ] button repeatedly

until the sound is of the best quality.

Result: The Sound system is changed.

7. With same method, it will want and to set the

system, the program, the fine and the name

of channel which it will be able to store.

Store

"[ - ]"

Exit

"MENU"

8. When you have finished, press the MENU button

repeatedly to return to normal viewing.