EarthQuake 9800 Series 운영자 매뉴얼 - 페이지 8

{카테고리_이름} EarthQuake 9800 Series에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. EarthQuake 9800 Series 20 페이지. Two-man earth auger powerhead
EarthQuake 9800 Series에 대해서도 마찬가지입니다: 운영자 매뉴얼 (16 페이지), 운영자 매뉴얼 (13 페이지), 운영자 매뉴얼 (19 페이지)

페이지 인쇄

ASSEMBLY

UNPACK POWERHEAD

1. Carefully lift the powerhead out of the box, remove any

packing material and cut any ties.

TOOLS REQUIRED

• Two (2) 9/16" Wrenches

ASSEMBLY INSTRUCTIONS (SEE FIGURE 1)

1. Insert the output shaft of the transmission in the open end

of the Flex Coil Shock Top.

2. Line up the bolt holes through the Flex Coil Shock Top and

the output shaft of the transmission.

3. Place the included 3/8-16 x 1.5 inch bolt through the bolt hole.

4. Hand-thread the 3/8-16 "Bi-way" locknut on the bolt.

5. Using two 9/16 inch wrenches, securely tighten the nut and bolt.

Two-Man Earth Auger Powerhead 9800 Series

3/8-16 bi-way

FIGURE 1

Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5

transmission

output shaft

locknut

Operator's Manual

3/8-16 x 1.5 inch bolt

flex coil shock top