360 Hunting Blinds SHANTY HUNTER 조립 설명서 - 페이지 2

{카테고리_이름} 360 Hunting Blinds SHANTY HUNTER에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 360 Hunting Blinds SHANTY HUNTER 8 페이지.

SHANTY HUNTER

ASSEMBLY MANUAL

INTRODUCTION

Follow this guide to assemble a Shanty Hunter Blind from

start to finish.

If you purchased a tower stand with your blind, please

refer to that assembly guide to assemble the tower first, the

come back to finish the setup of the blind on the fully

assembled tower stand.

SUPPLIES NEEDED

PARTS LIST

At no time shall 360 Hunting Blinds be liable for any accidents due to normal or improper use of blinds or tower stands.

We recommend that you follow standard safety procedures when entering and exiting the blind, or climbing or decending the

ladder.

Always use a gear rope to raise and lower your equipment into the blind.

Always use the handrail with both hands when climbing the ladder.

Never use the door handle to pull yourself onto the platform or stabalize your entry and exit.

• T-50 construction stapler

• Utility knife

• Impact Driver

• Caulk gun

• Level

• Flat bar or prybar

• 4 - 8" – 12" Pressure Treated 4 X 4s

• 1 floor

• 1 floor carpet

• 3 wall panels

• 1 door panel

• 1 roof

• Caulk

• 1 touch up kit

• 1 set of keys