360 Hunting Blinds 360 PRO 조립 설명서 - 페이지 2
{카테고리_이름} 360 Hunting Blinds 360 PRO에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 360 Hunting Blinds 360 PRO 8 페이지.
페이지 인쇄360 SERIES
ASSEMBLY MANUAL
INTRODUCTION
Follow this guide to assemble a series 360 Hunting Blind
from start to finish.
If you purchased a tower stand with your blind, please
refer to that assembly guide to assemble the tower first, the
come back to finish the setup of the blind on the fully
assembled tower stand.
SUPPLIES NEEDED
PARTS LIST
SAFETY DISCLAIMER
At no time shall 360 Hunting Blinds be liable for any accidents due to normal or improper use of blinds or tower stands.
We recommend that you follow standard safety procedures when entering and exiting the blind, or climbing or decending the
ladder.
Always use a gear rope to raise and lower your equipment into the blind.
Always use the handrail with both hands when climbing the ladder.
Never use the door handle to pull yourself onto the platform or stabalize your entry and exit.
• T-50 construction stapler
• Utility knife
• Impact Driver
• Caulk gun
• Level
• Flat bar or prybar
• 4 - 8" – 12" Pressure Treated 4 X 4s
360 STANDARD
• 1 floor
• 1 floor carpet
• 12 wall panels
• 1 door panel
• 1 roof
• Caulk
• 1 touch up kit
• 1 set of keys
360 PRO
• 1 floor
• 1 floor carpet
• 8 wall panels with
standard windows
• 4 wall panels with
archery windows
• 1 door panel
• 1 roof
• Caulk
• 1 touch up kit
• 1 set of keys
360 PRO XL
• 1 floor
• 1 floor carpet
• 8 wall panels with
standard windows
• 6 wall panels with
archery windows
• 1 door panel
• 1 roof
• Caulk
• 1 touch up kit
• 1 set of keys