Award CS1-903S 사용 설명서 - 페이지 10

{카테고리_이름} Award CS1-903S에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Award CS1-903S 15 페이지.

STAINLESS STEEL

The stainless steel must be cleaned regularly (e.g. weekly) to ensure a long life

expectancy. Dry with a clean soft cloth. A specialized stainless steel cleaning fluid may

be used.

NOTE:

Ensure wiping is done along with the grain of the stainless steel to prevent any

unsightly crisscross scratching patterns from appearing.

CONTROL PANEL SURFACE

The inlay control panel can be cleaned using warm soapy water. Ensure the cloth is

clean and well wrung before cleaning. Use a dry soft cloth to remove any excess

moisture left after cleaning.

Important

Using neutral detergents and avoid using harsh cleaning chemicals, strong household

detergents or products containing abrasives, as this will affect the appearance of the

range hood and potentially remove any printing of artwork on the control panel and will

void manufactures warrantee.

GREASE MESH FILTERS

The mesh filters can be cleaned by hand. Soak them for about 3 minute in water with a

mild detergent and then brush gently with a soft brush. Do not apply too much

pressure so as to avoid any damage to it. (Leave to dry naturally out of direct sun light)

Filters should be washed separately to crockery and kitchen utensils. It is advisable

not to use rinse aid.

INSTALLING GREASE MESH FILTERS

• To install filters follow these four steps:

- Angle the filter into the slots at the back of the range hood.

- Push the button on the handle of the filter.

- Release the handle once the filter fits into a resting position.

- Repeat to install all filters.