360 Hunting Blinds 360 STANDARD 조립 설명서 - 페이지 7

{카테고리_이름} 360 Hunting Blinds 360 STANDARD에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 360 Hunting Blinds 360 STANDARD 8 페이지.

STEP 9

INSTALL THE DOOR PANEL

With the roof and wall panels in place

it's time to install the door. Caulk both

wall panels, then set the door panel

in place and fasten like the other wall

panels. If you fastened any wall panels

to the ﬂ oor, remove those screws for

this step so you can shift wall panels

for a tighter seal to the door.

STEP 10

FASTEN THE ROOF

Center the roof on the blind.

Start above the door and screw

through the top of the wall panel into

the roof panel with SHORT screws

Align the panels with the roof by

pushing and pulling on each panel as

you work your way around the blind

aligning the panel joints with the

joints in the roof.

Use plenty of screws to make sure the

roof can't come off.

360HUNTINGBLINDS.COM

PAGE 7