Award H290/1S 사용자 설명서 - 페이지 10
{카테고리_이름} Award H290/1S에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Award H290/1S 16 페이지.
페이지 인쇄
2.3 Electrical Connection and Safety
WARNING: The electrical connection
of this hob should be carried out by
an authorised service person or
qualified electrician, according to the
instructions in this guide and in
compliance with the current local
regulations.
WARNING: THE HOB MUST BE
EARTHED.
Before connecting the hob to the power
•
supply, the voltage rating of the hob
(stamped on the hob identification plate)
must be checked for correspondence to
the available mains supply voltage, and
the mains electric wiring should be
capable of handling the appliance's
power rating (also indicated on the
identification plate).
During installation, please ensure
•
that isolated cables are used. An
incorrect connection could damage your
hob. If the mains cable is damaged and
needs to be replaced this should be
done by a qualified person.
Do not use adaptors, multiple sockets
•
and/or extension leads.
The supply cord should be kept away
•
from hot parts of the hob and must not
be bent or compressed. Otherwise the
cord may be damaged, causing a short
circuit.
If the hob is not connected
•
to the mains with a plug, a all-pole
disconnector switch (with at least 3 mm
contact spacing) must be used in order
to meet the safety regulations.
The fused switch must be easily
•
accessible once the hob has been
installed.
Ensure all connections are adequately
•
tightened.
Fix the supply cable in the cable clamp
•
and then close the cover.
•
The terminal box connection is placed
on the terminal box.
•
Brown
EN - 10
Blue
Yellow+Green