EarthWay 2050TP 조립 지침 매뉴얼
{카테고리_이름} EarthWay 2050TP에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. EarthWay 2050TP 6 페이지. Broadcast spreader
EarthWay 2050TP에 대해서도 마찬가지입니다: 운영 지침 (5 페이지), 조립 지침 (4 페이지), 빠른 시작 매뉴얼 (5 페이지), 조립 지침 (2 페이지)
페이지 인쇄
MODEL # 2050TP
HELPFUL HINTS
Read the directions before assembly.
If your spreader does not spread evenly, be sure "FRONT" on the GEARBOX points to the front of the spreader. The
impeller must turn clockwise when pushing forward. Reversing the GEARBOX during assembly will cause issues.
Your spreader is calibrated for three miles per hour, which is a brisk walking speed. Slower or faster speeds will
change the spread pattern. Wet fertilizer will also change the spread pattern and flow rate. Do not use powdered
materials as it will damage the gearbox.
Gears are permanently lubricated at the factory. Do not open the GEARBOX or dirt may enter.
PRIOR TO ASSEMBLY YOU WILL NEED:
#2 PHILLIPS SCREWDRIVER
2050TP_M52168_080822
Broadcast Spreader
ASSEMBLY INSTRUCTIONS
SIDE SPREAD CONTROL
Patent U.S. 10,993,368
Your EarthWay spreader includes a patented
feature to prevent fertilizer from being spread
to the left side. To activate this feature, slide the lever
below the hopper to the back (if standing behind the
spreader) and position the left wheel 6"-12" from your
sidewalk or border. This will not waste fertilizer like
competitor designs that leave 7X the fertilizer inside the
wheels from blocking material leaving the impeller.
AN ADUSTABLE BOX WRENCH
80 lb Estate Tow
PAGE 1