EarthWay 60600 조립 지침 - 페이지 4

{카테고리_이름} EarthWay 60600에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. EarthWay 60600 5 페이지. Deflector kit

MODEL # 60600

Step 6:

Locate on the spreader the

cross‐bar lock nuts. Remove the

locknuts and place the deflector bracket

over the bolt. The deflector bracket has

a c‐shaped section that will fit flush on

the end of the spreader stand (black

bent hoop bar).

Step 7:

Re‐install each lock nut

through the deflector mounting bracket

so that the deflector will now be

attached to the 90950 spreader.

Step 8:

Adjust deflector so that side

panels have proper clearance from tires

throughout panel rotation. To increase

clearance, slide wire deflector frame

through the guide in the deflector

mounting clamp ears.

TO ATTACH DEFLECTOR

TO 2150,2170,90399 or

90365 SPREADERS

Step 5:

Mount round frame clamps (#

12305) on deflector frame in the

orientation shown. Leave bolts (#36210)

and locknuts (# 36330) marked by

arrows loose. This will allow you to split

bracket and slide deflector bracket over

frame of spreader and clamp tight.

P60600_M52133_Rev_Nov2021

ASSEMBLY INSTRUCTIONS

DEFLECTOR KIT

PAGE 4