EarthWise SN74016 운영자 매뉴얼 - 페이지 11

{카테고리_이름} EarthWise SN74016에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. EarthWise SN74016 17 페이지. 16-in snow thrower

Auger (Fig. 8, 13)

CAUTION Check fasteners before each use. A

loose auger can result is excessive vibration and

damage the snow thrower.

To replace the auger:

1. Remove cover (8) and friction plate (16). Remove

bolt (15), washer (14), fix plate (13), and drive belt

(6).



Loosen the nut (24) from the other side of the auger

(18) and dismount the pulley (12) and auger axle

(19).



Replace the auger with a new one.

MAINTENANCE AND STORAGE

4. When reassembled ensure all screws and nuts are

properly tightened.

Scraper blade (Fig. 14)

The scraper blade is a wear item and should be replaced

when necessary. A worn scraper blade can cause

extreme vibration and damage the auger.

To replace the scraper blade:

1. Remove the three screws from the bottom of the

blade and slide the blade forward to remove.

2. Install new scraper blade.

3. Secure with the three screws.

4. Ensure the screws are properly tightened.