ALLION UCPET 매뉴얼

{카테고리_이름} ALLION UCPET에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ALLION UCPET 2 페이지. Allion usb charging/protocol/electrical tester

Allion USB Charging/Protocol/Electrical Tester (UCPET)

Introduction:

Thank you for choosing UCPET product from Allion Labs, Inc.

USB Charging/Protocol/Electrical Tester (UCPET) is the automatic test equipment designed

for USB Battery Charging Spec V1.2. It also has been approved by USB-IF as standard test

solution for USB Battery Charging V1.2. UCPET can automatically implement the test

categories of USB BC1.2 to verify if your product meets the specification requirements. With

features of easy-to-use manual setting and software for oscilloscope usage, UCPET is able

to assist you pass through USB BC1.2-related product development, debugging and

validation.

Main Function:

Approved by USB-IF as standard test solution for USB Battery Charging V1.2

Support Bypass Capacitance checking

Support BC v1.2 Implementation checking

Support BC v1.2 compliance test for DCP, CDP and PD categories

Easy for developing and debugging:

[Manual Operation]

User can use Manual Operation function to conduct UCPET directly. Under this mode,

UCPET can imitate DCP, CDP, SDP and etc. User can also turn on Soft Scope function at

the same time, observing Vbus, D+, D- and current signal waveform.