Christie 140-133108 Series 지침서 - 페이지 11
{카테고리_이름} Christie 140-133108 Series에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Christie 140-133108 Series 17 페이지. Ultra short throw lens installation
페이지 인쇄
11. Turn the projector back to its original orientation.
12. Install the three extension rods.
The boresight extensions rods must be installed before installing the ultra short throw lens.
Initially adjusting the boresight screws
Before installing the ultra short throw lens, Christie recommends initially adjusting the boresight. Once
the lens is installed, the adjustment range is limited.
1. Confirm the boresight screws are in their initial position with the blue marks aligned as shown.
2. If the boresight screws are not in their initial position, turn the screws counterclockwise until
they stop and then turn the screws clockwise until the blue marks are aligned as shown above.
3. Adjust the boresight to the recommended ranges according to the projector orientation.
For DHD700-GS, DWU700-GS, DHD850-GS, and DWU850-GS:
Orientation
Table top
Portrait (right)
Portrait (left)
Ceiling mount
Ultra Short Throw Lens Installation Instruction Sheet
020-102569-05 Rev. 1 (11-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Adjustment range (in turns) for boresight screws
A
3 + 1/4
6 + 3/4
5 + 1/4
10 + 1/2
Ultra short throw lens installation
B
9
7
10 + 3/4
7 + 1/4
C
9
10 + 3/4
6
7 + 1/4
11