Christie 108-506102-01 지침서 - 페이지 3

{카테고리_이름} Christie 108-506102-01에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Christie 108-506102-01 7 페이지.
Christie 108-506102-01에 대해서도 마찬가지입니다: 설치 (9 페이지)

attached to the mount. Use the four brass leveling screws to attach and level the adapter plate

on the projector.

6. Quick-release for rapidly attaching the projector to the Christie One Mount. Verify that the

quick-release ring is seated in the slotted groove.

7. Secure the projector to the ceiling mount with the quick-release.

Install a Christie One Mount Instruction Sheet

020-101410-02 Rev. 1 (08-2014)

Make sure the projector is locked into place by verifying that the spring lock pin is

seated in the calibration device slot. A clicking sound indicates the lock pin is seated

properly in the holder. Verify that no gap exists between the ceiling plate collar and

calibration device.

Failure to comply may result in equipment damage, serious injury, or even death.

Install a Christie One Mount