Christie CineLife+ CP4435-RGB 설치 및 설정 매뉴얼 - 페이지 13
{카테고리_이름} Christie CineLife+ CP4435-RGB에 대한 설치 및 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Christie CineLife+ CP4435-RGB 19 페이지. Christie rack mount pedestal
Christie CineLife+ CP4435-RGB에 대해서도 마찬가지입니다: 교체 (7 페이지)
페이지 인쇄
7. Make sure enough space is provided between the projector and the foot brackets.
This space is required to install the projector foot bracket locks.
Installing the projector foot locks
The foot locks secure the projector feet into position.
1. Slide the projector foot lock over the projector foot bracket.
2. Install one screw in each of the four projector foot locks to secure them in position.
Configuring the rack for side-mounting
By default, the Christie Rack Mount Pedestal is configured for back-mounting of components. Complete
this procedure if side-mounting of components is required.
1. Remove the side panel from each side of the rack.
a) Unlock the side panel.
b) Press down on the two panel latches and tip the panel away from the rack.
c) Lift the panel up and out from the rack and set aside.
d) For the second panel, repeat steps a to c.
Christie Rack Mount Pedestal Installation and Setup Guide
020-100632-04 Rev. 1 (08-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Installation and setup
13