Christie Terra TXO 102 SO 설정 및 설치 매뉴얼 - 페이지 12

{카테고리_이름} Christie Terra TXO 102 SO에 대한 설정 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Christie Terra TXO 102 SO 17 페이지. Controlled systems

16. On the Configure New Controller tab, click Configure next to the Controller you want to configure.

17. Enter the IP information for the Controller.

18. Click Save. The Controller will be restarted. It takes approximately one-four minutes to restart the

Controller. When the Controller is ready (displaying the IP address on the front of the Controller),

Terra Startup Assistant will attempt to connect to it. If you want to connect to a different Controller,

type the IP address in the Select Controller or Enter IP and Press Enter field.

19. Use the Terra Startup Assistant, to assign IP addresses to the discovered devices.

To configure a redundant Controller, refer to the Terra User Guide.

Terra Controller Installation and Setup Manual

020-102804-02 Rev. 1 (09-2018)

Install and Setup