Miele NOVOTRONIC W 1926 사용 설명서 - 페이지 32

{카테고리_이름} Miele NOVOTRONIC W 1926에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele NOVOTRONIC W 1926 48 페이지. Miele washer user manual
Miele NOVOTRONIC W 1926에 대해서도 마찬가지입니다: 사용 설명서 (48 페이지)

페이지 인쇄

Problem solving guide

What to do if, . . .

. . . the "Pre-wash", "Main

wash" or "Rinse 1-2" indica-

tor lamp is flashing?

. . . The "Rinse & hold" indi-

cator lamp is flashing?

. . . The "Final spin" indica-

tor lamp is flashing?

. . . The "ON" indicator lamp

is flashing?

. . . The wash is too wet after

the final spin?

. . . The machine shakes dur-

ing the spin cycle?

Cause . . .

There is an internal problem.

The spin speed setting has

been set to "Without final spin".

The final spin has not taken

place. The machine detected

an imbalance.

The child-safety feature is

activated, and the programme

has been changed.

The spin speed selected was

too low.

The load was not evenly

distributed in the drum, and the

laundry was spun at a reduced

speed to protect the machine.

The drain pump or lint trap is

clogged.

The four feet are not resting

evenly on the floor.

The shipping struts have not

been removed.

Remedy . . .

Restart the programme. If the

indicator lamp starts flashing

again, call the Service Dept.

Select a spin speed setting.

–

Redistribute the laundry load.

–

Select a spin speed.

–

Turn the programme selector

to "Spin".

Go back to the programme

originally selected.

Select a higher spin speed next

time.

Mix large and small items in a

load to avoid imbalance.

Clean the drain pump or lint

trap.

Level the machine (see

Installation Section).

Remove the shipping struts.