Miele PW 6101 프로그래밍 지침 매뉴얼 - 페이지 24
{카테고리_이름} Miele PW 6101에 대한 프로그래밍 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele PW 6101 48 페이지. Profitronic m innovation m
Miele PW 6101에 대해서도 마찬가지입니다: 사용 설명서 (44 페이지), 사용 설명서 (46 페이지), 프로그래밍 지침 매뉴얼 (48 페이지)
페이지 인쇄
Programming
12. Dispensing phase 1
This option is used for specifying the
dispensing procedure for a max. of 6
dispenser pumps.
Selection choice:
– No
Dispensing does not take place.
– User defined
Dispenser pumps
1 dispenser pump per dispensing
can be selected from D1 to D 13
Dispensing amount (depending on
dispensing method selected)
0 to 999 ml or
0 to 50 ml/l or
0 to 50 ml/kg
Dispensing delay
0 to 999 sec.
– X with dispensing type set to "No"
13. Dispensing stop 1
Selection choice:
– No
The dispensing process takes place at the
same time as the following programme
steps. Dispensing stops at the end of wash
time 1.
– Yes
Long dispensing phases are not stopped.
The subsequent wash time 1 will not start
until the dispensing procedure is complete.
– X with dispensing type set to "No"
24
14. Agitation from level
This defines drum agitation in the
programme block after the first water intake.
Selection choice:
– Automatic
– User defined
Time
0, 15 to 59 sec
0 to 99 min.
Rhythm
No
Normal
12/3 sec. Wash/Pause
Gentle
5/10 sec. Wash/Pause
Gentle+
3/27 sec. Wash/Pause
User defined
On: 2 to 99 sec.
Off: 2 to 99 sec.
rpm
No
Normal
Drench
User defined 20 to 70 rpm.
Start drum rotation
Auto load adjustment
0 mm to level 1
Water level
0 mm to level 1
Water volume
0 l to level 1
Laundry to suds ratio
1:0 to 1:20 kg/l
M.-Nr. 06 533 430