Miele PW 6101 프로그래밍 지침 매뉴얼 - 페이지 41

{카테고리_이름} Miele PW 6101에 대한 프로그래밍 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele PW 6101 48 페이지. Profitronic m innovation m
Miele PW 6101에 대해서도 마찬가지입니다: 사용 설명서 (44 페이지), 사용 설명서 (46 페이지), 프로그래밍 지침 매뉴얼 (48 페이지)

페이지 인쇄

If there is insufficient space in memory to

take the selected programmes the following

will appear in the display:

Data to control unit ~ Programme

Insufficient controller memory

If you press the A button or, if you do not

touch any buttons in the next 30 seconds the

transfer procedure will not be carried out

and you will be taken back to the sub menu.

If there is sufficient memory in the control

unit the following will appear in the display

after the data has been successfully

transferred:

Data to control unit ~ Programme

If the target programme place already has a

programme in it, a warning message will

appear in the display.

M.-Nr. 06 533 430

Settings

This menu is used for copying supervisor

level settings from a card into the control

unit. Existing data is only overwritten after

another confirmation to do so.

Data to control unit ~ Settings

Settings: 11 : 30

^ After pressing the rotary dial the following

message will appear in the display:

Data to control unit ~ Settings

Overwrite existing data?

^ After pressing the "Save" S button the

following message will appear in the

display during the data transfer process:

Data to control unit ~ Settings

Chip cards

10.06.04