Miele PW 6101 프로그래밍 지침 매뉴얼 - 페이지 9
{카테고리_이름} Miele PW 6101에 대한 프로그래밍 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele PW 6101 48 페이지. Profitronic m innovation m
Miele PW 6101에 대해서도 마찬가지입니다: 사용 설명서 (44 페이지), 사용 설명서 (46 페이지), 프로그래밍 지침 매뉴얼 (48 페이지)
페이지 인쇄
Programme structure
Programme header
Programme number, Programme name,
Material number, Area 1-2-3,
Name - Area 1-2-3, Weigh, Nominal load,
Min. water level, Fill type, Access control,
Lock, Peak load, Hot water control, Price
Area 1
Pre-washes
Pre-wash 1 to Pre-wash 10
(max. 10 blocks)
Main washes
Main wash 1 to Main wash 10
(max. 10 blocks)
Area 3
Rinses
Rinse 1 to Rinse 10
(max. 10 blocks)
A programme consists of a Programme
header, a pre-wash area, a main wash area
and a rinse area. These areas can be used
individually or together to create a
programme. However areas cannot be
present twice. Each area is made up of
individual blocks.
The programme header contains general
programme structures which relate to the
whole programme. See menu point "Create".
The blocks for the individual areas are all
identical and contain the same basic
parameters.
The simplest way of creating a new
programme is to copy an existing
programme, or blocks or areas from an
existing programme and then to make
changes to these.
M.-Nr. 06 533 430
Area 2
Programming
Programme block
Block name
1. Block activation
2. Programm stop 1
3. Programme stop signal 1
4. Heating
5. Free temperature selection
6. Temperature
7. Hysteresis
8. Warm up
9. Water level 1
10. Water inlet 1
11. Dispensing method
12. Dispensing phase 1
13. Dispensing stop 1
14. Agitation from level
15. Water level stop 1
16. Wash time 1
17. Thermo stop
18. Water level 2
19. Water inlet 2
20. Dispensing phase 2
21. Dispensing stop 2
22. Water level stop 2
23. Wash time 2
24. Cool down
25. Wash time 3
26. Programme stop 2
27. Programme stop signal 2
28. Drain path 1
29. Drain level
30. Wash time 4
31. Drain path 2
32. Free spin speed selection
33. Spin
34. Repeat
35. Block end signal
9