Miele PW 6131 사용 설명서 - 페이지 7

{카테고리_이름} Miele PW 6131에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele PW 6131 46 페이지. Profitronic m innovation m
Miele PW 6131에 대해서도 마찬가지입니다: 사용 설명서 (44 페이지), 프로그래밍 지침 매뉴얼 (48 페이지), 프로그래밍 지침 매뉴얼 (48 페이지)

페이지 인쇄

Chlorine and component damage

Notes on using chlorine bleach and

perchlorethylene

Frequent use of chlorine increases the

risk of component damage.

The use of agents containing chlorine, such

as sodium hypochlorite and chlorine bleach

in powder form, can damage the protective

surface of stainless steel and cause

corrosion. Factors affecting this are chlorine

concentration levels, contact time and

temperature. It is therefore advisable to

avoid the use of such agents. Oxygen based

bleaching agents should be used instead.

If, however, chlorine based bleaching

agents have to be used for particular types

of soiling, then anti-chlorine measures must

also be carried out. If this is not done

irreparable damage can occur to

components in the machine and to laundry.

Anti-chlorine treatment

Anti-chlorine treatment has to be carried out

immediately after chlorine bleach has been

used. Hydrogen peroxide and oxygen based

cleaning and bleaching agents must only be

used in programmes specified for their use.

Any wash performance problems should be

discussed with the manufacturer of the

cleaning / bleaching product in the first

instance.

With thiosulfate, especially when used with

hard water, gypsum can form, which can

lead to incrustations on laundry or deposits

in the machine.

The exact quantity of additives and the

treatment temperatures required must be set

and tested on site in accordance with the

dosage recommendations of the detergent

and additive manufacturers. The laundry

must also be tested to make sure it contains

no active chlorine residues after processing.

M.-Nr. 06 533 412

Warning and Safety instructions

Disposal of your old machine

Before disposing of an old machine, first

make the door lock unusable. This way

you will prevent children from accidentally

locking themselves in and endangering their

lives.

All personnel working with this machine

must be fully trained in all aspects of its

use and safety.

Keep these instructions in a safe and

accessible place.