Miele PW 6241 작동 및 설치 지침 - 페이지 18
{카테고리_이름} Miele PW 6241에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele PW 6241 44 페이지.
Miele PW 6241에 대해서도 마찬가지입니다: 작동 및 설치 지침 (44 페이지), 사용 설명서 (46 페이지), 프로그래밍 지침 매뉴얼 (48 페이지)
페이지 인쇄
Use
Skipping program cycles
Cycles of a program in progress can be
skipped or repeated.
^ Press the f "End" button to stop the
program.
1
Hot Wash
Program stop
ü
i
^ Press the ü "Skip/Repeat" button. The
display shows the current area, block or
step.
See also "Program structure" in the
Programming Manual.
Skip/Repeat
-> 1 Hot Wash
Program stop
Area 2: Main wash
Area 2: Main wash
Block 1: Main wash
Step Wash time 2
^ Turn the jog shuttle to "Area" and press it to
confirm the selection.
Area: Select either 1 Prewash, 2 Main
wash or 3 Rinse and confirm by pressing
the jog shuttle.
^ Turn the jog shuttle to "Block" and press it
to confirm the selection.
Block: Select either Prewash 1-10, Main
wash 1-10 or Rinse 1-10 and confirm by
pressing the jog shuttle.
^ Turn the jog shuttle to "Block" and press it
to confirm the selection. Select the desired
program step and confirm.
^ To start the new program step press S
"Save" and h "Start".
To go back without skipping a program
cycle
^ Press the A "Back" button to go back to
the program stop.
18
Program stop
^ To stop the program, press f "End".
The program stops.
1
Program stop
f
^ Press f "End" again to continue the
program.
Program end with water in the drum
If the program is interrupted during a cycle,
the display shows either:
1
Program end - Water in the drum
e
A
S
or
1
-
A
Program end - Drum rotates
S
,
Do not use force!
^ Press the q "Drain" button or select the
Drain Extra program and press h "Start".
^ At the end of the program open the door.
Hot Wash
ü
i
Hot Wash
m
Hot Wash
m
The drum door is locked.
f
FC
A
FC
A