Miele PW 6241 작동 및 설치 지침 - 페이지 24

{카테고리_이름} Miele PW 6241에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele PW 6241 44 페이지.
Miele PW 6241에 대해서도 마찬가지입니다: 작동 및 설치 지침 (44 페이지), 사용 설명서 (46 페이지), 프로그래밍 지침 매뉴얼 (48 페이지)

페이지 인쇄
Miele PW 6241 작동 및 설치 지침

Chip card use

Chip cards are programmed to a machine
type. Empty cards can be used with any
machine.
^ Press l "On" to turn the washer on.
The Welcome screen shows.
^ Insert the card, arrow first, into the card
reader.
The display shows the list of programs on
the card, example:

Card operation

17
Fire department clothing 113 °F
18
Wrinkle-free
ß
i
^ Turn the jog shuttle to select a program.
Press the jog shuttle to confirm the
selection.
^ Press the h "Start" button to begin the
program.
^ Remove the card from the card reader.
Once the program is finished it will be
deleted from the machines memory.
,
Do not insert any items other than the
card into the card reader.
24
140 °F
FC
A
If the card was inserted the wrong way, the
display shows:
Card fault
§
Reinsert card correctly in card reader.
ü
i
^ Reinsert the card properly into the card
reader.
If the card is not suitable for this type of
machine, the display shows:
Card operation
Programs on the card are only
suitable for machine type PW 6101
^ Insert a card suitable for this machine
type.
Card operation
For laundry loads which need special wash
procedures, a single special program is
written on a card which is then used to run
the program.
This function blocks all machine programs.
The washer runs only the program saved on
the card.
The function "Load" can be activated in the
supervisor level. The machine will only
accept cards in this function.
f
A