Miele TWL 780 WP 매뉴얼 - 페이지 9

{카테고리_이름} Miele TWL 780 WP에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele TWL 780 WP 15 페이지.

Installation

Changing the door hinging

You can change the door hinging on

this tumble dryer yourself.

For safety reasons, the tumble dryer

must be disconnected from the

electricity supply before changing

the door hinging.

You will need:

- a T20 and T30 Torx screwdriver

- a flat head screwdriver or pointed

pliers

- the lock catch cover supplied

- the door hinge cover supplied

- a soft surface (e.g. a tablecloth)

Changing the hinging over

1. Remove the door from the dryer

 Open the door.

 Use a T30 Torx screwdriver to

unscrew the two screws on the base

plate of the door hinge .

The door cannot fall off as it is held in

place by two pins.

11909320-00

 Hold the door securely and pull it

forwards: to remove the door you will

need to pull the base plate of the

hinge with its two pins out of the

dryer.

To avoid scratching the door, place it

outer side downwards on a soft

surface (e.g. a tablecloth).

2. Change over the door lock on the

dryer

 Use a T30 Torx screwdriver to

unscrew the two screws on the door

lock .

 Use the screwdriver to press the door

lock upwards.

The door lock will spring out of its

position and can then be removed.