Miele W 6071 사용 설명서 - 페이지 38

{카테고리_이름} Miele W 6071에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele W 6071 40 페이지.
Miele W 6071에 대해서도 마찬가지입니다: 사용 설명서 (38 페이지), 작동 및 설치 지침 (44 페이지)

Plumbing

Please read the installation diagram and

instructions supplied. They are important

for the proper connection of supplies.

Water connection

The water hook up is by a water valve, which

conforms with local and national regulations.

This work must be carried out by a Miele

authorized service technician.

The inlet pressure hoses supplied with the

machine must be used for connection to the

water supply.

To ensure the hot water inlet hose (marked

194°F/90°C) lasts for many years, do not

hook the hose up to a hot water connection

supplying water hotter than 158°F/70°C.

This hose should only be replaced with a

genuine Miele spare parts.

A water pressure flow rate of 30 psi - 145 psi

(2 -10 bar) is required.

Water taken into the machine must not

exceed a temperature of 158°F/70°C.

Connection to cold water only:

see, the supplied installation diagram.

Drainage system

- for machines with a drain pump

The wash water is drained using a pump

with a 3 ft (1m) delivery height. Make sure

there are no kinks in the drain hose. The

elbow on the end of the drain hose can be

turned or removed if necessary.

Possible connections:

^ Directly into a sink Water will drain into the

sink quickly, ensure that it will be able to

drain away. Otherwise the water will over-

flow or possibly sucked back into the

machine.

^ Connect to a plastic drain pipe with a

rubber nipple. (Siphon not necessarily

required).

^ Connection to a floor drain (gully).