Miele W 6071 작동 및 설치 지침 - 페이지 40

{카테고리_이름} Miele W 6071에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele W 6071 44 페이지.
Miele W 6071에 대해서도 마찬가지입니다: 사용 설명서 (40 페이지), 사용 설명서 (38 페이지)

페이지 인쇄
Miele W 6071 작동 및 설치 지침

Electrical Connection

Electrical connection
,
All electrical work must be performed
by a qualified technician in accordance
with applicable codes and standards.
The machine must only be connected to the
voltage and frequency shown on the data
plate.
The machine is supplied as standard for
connection to a 208 V, 60 Hz, 3 x 20 A,
three-phase electrical supply. Each leg of
power must be 104 - 110 V.
There are further notes on electrical
connection in the installation diagram.
The electric heater rating is factory preset to
15 kW.
The minimum suds level required to activate
heating is 2" (50 mm) column of water.
The motor has an overload protection
switch.
Connection should be made via a suitable,
approved isolator, with an easily accessible
on-off switch to be as an emergency off
switch or for servicing.
WARNING
THIS APPLIANCE MUST BE
GROUNDED
!
40