Miele WS 5101 사용 설명서 - 페이지 14

{카테고리_이름} Miele WS 5101에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele WS 5101 32 페이지. Washer-extractor

페이지 인쇄

Operation

Changing temperaure and spin

speed

The following parameters can be changed

before the start of a program:

– the temperature in 1 °C steps from cold,

15 °C to maximum 95 °C .

– the spin speed in 100 rpm steps.

WS 5101 300 - 1500 rpm

WS 5141 300 - 1000 rpm

PROGRAMME

>60 °C<

Prewash

95 °C

Main wash

Rinses

^ Use the 2 "Cursor" to position the cursor

on the input field for the Prewash tempera-

ture, and set the temperature required

(here 60 °C) with the 3 4 "Minus or Plus".

^ Position the cursor on the input field for the

Main wash temperature, and set the tem-

perature required with 3 4 "Minus or

Plus".

^ Position the cursor on the input field for the

spin speed, and set the spin speed requi-

red with the 3 4 "Minus or Plus".

Adding detergent

^ For the standard programs add detergent

for the main wash into compartment II and,

if required into compartment I for the

prewash. Fabric softener is put into com-

partment § and liquid bleach is put into

the compartment without a symbol.

COTTONS

1000 RPM

Detergent use

^ Only use low sudsing detergents. Do not

oversuds the unit with too much detergent.

^ Take into account the water hardness, and

the detergent manufacturer's instructions

when filling the dispenser.

^ Do not fill fabric softener or bleaching

agent higher than the level marker in the

relevant dispenser compartment.

Otherwise they will be siphoned into the

suds container.

^ Press X "Start" to begin washing.