Miele WS 5425 MC 7 Professional 사용 설명서 - 페이지 35

{카테고리_이름} Miele WS 5425 MC 7 Professional에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele WS 5425 MC 7 Professional 48 페이지. Washer-extractor

Installation surface

Experience has shown that a concrete

floor is the most suitable for a washing

machine. Concrete floors are far less

prone to vibration during the spin cycle

than wooden floorboards.

Please note the following points:

The machine must be level and se-

curely positioned.

To avoid vibrations during spinning,

the machine should not be installed

on soft floor coverings.

If installation must be on a wooden

joist floor: we recommend the use of

a plywood base (at least 70 x 60 x

3 cm). Ideally the base should be

large enough to span several joists

and should be bolted to the joists

and not just the floorboards. Check

for presence of pipes and cables

first.

As a general rule, we recommend

the installation of the machine (or

washer/dryer stack) in the corner of

a room where the stability of the floor

is at its greatest.

If the machine is installed on a

raised plinth, it should be secured

using the 2 butt straps supplied with

the machine, see illustration on p. 38.

Installation

Lift the machine from its packaging

base and move it to its site.

Please note:

Do not lift the machine by the drum

door.

Ensure that the machine feet and the

floor are dry to prevent the machine

from slipping during the spin cycle.

Removing the transit fitting.

Turn the left-hand transit

bar 90° clockwise.

Installation