Miele G 2150 매뉴얼 - 페이지 36
{카테고리_이름} Miele G 2150에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele G 2150 46 페이지.
Miele G 2150에 대해서도 마찬가지입니다: 매뉴얼 (14 페이지)
페이지 인쇄Technical Information
Water Hardness [°d]
37 – 50
51 – 60
61 – 70
Table 25: Water Hardness Settings, G 2420/G 243x
Note:
If the dishwasher is connected to an external ion exchanger water softener
(i.e. that needs to be regenerated with salt), the water hardness delivered
by the system must be set. If this value is unknown, set to 8°d (8.6 grains
per gallon).
2.10
Excella - G 2630/G 2670
Initial requirements:
1. Close the door (open for G 2670).
2. Switch off the appliance.
Accessing:
1. Press and hold the C (clear) button.
2. Switch on the appliance.
3. Release the C (clear) button when the display lights up.
4. Immediately press the C (clear) button 5 times; on the 5th time, hold for
at least 4 seconds.
Acknowledgement indicator:
Successful accessing of the programming mode is indicated by the LEDs,
which are all off, and Service programming, in the top line of the display.
The display always indicates three parameters at a time.
Use the cursor buttons to scroll through the display.
Options:
Note:
Some of the following parameters can also be programmed via the Settings menu.
Water Hardness [gpg]
1
2
3
...
36
36
1.1
2.1
3.2
...
38.5
39.6 – 53.5
54.6 – 64.2
65.3 – 74.9
G 1xxx/G 2xxx
Display
P1
P2
P3
...
P36
P50
P60
P70