Miele G 618 설치 지침 매뉴얼 - 페이지 13

{카테고리_이름} Miele G 618에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele G 618 28 페이지. 45 cm wide fully integrated dishwashers
Miele G 618에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (28 페이지)

페이지 인쇄

Dimension X must be calculated and

noted before attaching the fixing

bracket.

Dimension X is the distance shown on

the illustration between the drill hole in

the machine outer door panel and the

lower edge of the neighbouring unit

door.

^ Push the dishwasher into the recess

and adjust the height.

^ Calculate dimension X.

Fitting the fixing bracket to a door

front

^ Lay the door front down with the rear

side facing upwards. Draw a vertical

line down the middle of the door front

rear to use as a guide line.

^ Mark dimension X onto the rear of the

door front, up from the bottom edge.

With two-piece panels:

If the two-piece panel is joined by

non-flush fixings these must be

removed. The fixing bracket supplied

with the dishwasher can be used to

secure both pieces.

Make sure that the combined height

worked out is retained.

Installation