Miele G 636 설치 지침 매뉴얼 - 페이지 14
{카테고리_이름} Miele G 636에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele G 636 48 페이지. G 600 / g 800 series dishwasher
Miele G 636에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (40 페이지), 설치 지침 매뉴얼 (40 페이지), 설치 지침 매뉴얼 (40 페이지)
페이지 인쇄
Installing integrated "i" Dishwashers
5. Fitting the (matching) door
front
Fixing brackets are already fitted on
stainless steel door fronts. These fronts
cannot be shortened.
(Go to "Fitting and securing the door
front".)
The door of a kitchen base unit (without
drawer front or fittings) is normally used
for the door front.
If a kitchen door front is not available, a
panel with the following dimensions
may be used:
Width: depending on model
G 601 - G 632
}
G 801 - G 832
G 636 - G 698, G 975
G 836 - G 898
Thickness:
the same thickness as the neighbouring
door fronts but a minimum of 16 mm.
Height:
Dimension X
14
440 - 447 mm
}
590 - 597 mm
Fitting the fixing bracket
A fixing bracket must be fitted to the
rear of the door front panel. This is then
used for attaching the door front panel
to the door outer panel on the machine.
Templates are provided to position the
fixing bracket and the door front
accurately.
^ On each side of the fixing bracket
position a template with the rule
markings facing outwards.