Miele G 641 SCi 설치 지침 매뉴얼 - 페이지 20

{카테고리_이름} Miele G 641 SCi에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele G 641 SCi 48 페이지. Miele novotronic dishwasher operating instructions
Miele G 641 SCi에 대해서도 마찬가지입니다: 사용 설명서 (48 페이지)

페이지 인쇄

Installing integrated "i" Dishwashers

8. Matching the plinth facing

of a kitchen run

The plinth area of the dishwasher is

normally covered with a plinth run

matching the kitchen furniture.

The height (H) of the plinth facing in

front of the dishwasher depends on the

plinth return (R) and how much the

door front extends below the

dishwasher door (P).

^ Place the plinth facing directly in front

of the kitchen run but do not attach.

^ Carefully open the dishwasher door.

If the door front comes into contact with

the kitchen plinth when the dishwasher

door is opened the plinth facing in the

area behind the dishwasher door needs

to be cut to size.

^ To do this mark where the edge of the

door front comes into contact with the

plinth facing.

^ Cut the plinth facing to size along this

line.

^ Place the plinth facing in front of the

kitchen run again and check whether

the dishwasher door can be opened

fully.

If it cannot, trim the plinth facing

again until the correct size is

achieved.

^ Secure the plinth facing to the

adjacent kitchen units in accordance

with the kitchen furniture

manufacturer's instructions.

If your kitchen does not have a plinth

run matching the kitchen furniture, the

plinth area can be covered with a

separate plinth kit, available at extra

cost (special accessory).