Miele G 641 SCi 설치 지침 매뉴얼 - 페이지 32

{카테고리_이름} Miele G 641 SCi에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele G 641 SCi 48 페이지. Miele novotronic dishwasher operating instructions
Miele G 641 SCi에 대해서도 마찬가지입니다: 사용 설명서 (48 페이지)

Installing built-under "U" model dishwashers

6. Adjusting the door springs

The door springs are correctly adjusted
when the door remains stationary when
left open at 45°.
If the door drops down, the door
springs need to be tightened.
If the door rises up the springs need to
be loosened.
The adjusting screw is located in the
upper front strip at the left hand side of
the dishwasher.
Please note:
If the door front is too heavy for the
door springs (i.e. the door falls open)
then stronger springs should be fitted.
Please contact your Miele dealer or the
Miele Service Department for advice.
32
^ Half open the dishwasher door.
The door springs are easier to adjust
when the door is only half open than
when it is fully open.
^ Adjust the door spring with a Torx
T20 or a 1 x 5.5 mm screwdriver until
it is correctly balanced:
- Turn clockwise to tighten.
- Turn anti-clockwise to loosen.