Miele G 641 SCi 사용 설명서 - 페이지 18

{카테고리_이름} Miele G 641 SCi에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele G 641 SCi 48 페이지. Miele novotronic dishwasher operating instructions
Miele G 641 SCi에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (48 페이지)

페이지 인쇄

Before using for the first time

Salt indicator

When the salt reservoir is empty, the

"Salt-PC" indicator will light, indicating

that it should be refilled with reactiva-

tion salt.

After the reservoir has been filled, the

water softener is automatically reacti-

vated the next time the dishwasher is

started. The "Salt" indicator will be lit

during this process.

Bypassing the salt indicator

If your water is soft (below 8 gr/gal) the

salt reservoir should not be filled with

salt. The indicator will remain lit and

should be disregarded or bypassed.

^ Remove the salt reservoir cap.

Looking into the salt reservoir, you will

see the top of the float chamber on the

right hand side, a.

^ Using a screwdriver, carefully pivot

the float chamber towards the center

of the reservoir.

^ Using needle nose pliers, pull the

cap, b, off of the float chamber, and

remove the float, c.

Replace the float chamber cap, push

the chamber back into its upright posi-

tion, and replace the salt reservoir cap.

The "Salt" indicator should no longer be

lit.