Miele G 643 설치 지침 매뉴얼 - 페이지 19

{카테고리_이름} Miele G 643에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele G 643 28 페이지. Integrated dishwasher
Miele G 643에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (40 페이지), 설치 지침 매뉴얼 (28 페이지), 설치 지침 매뉴얼 (40 페이지)

페이지 인쇄

1. Adjusting the Door Springs

The plinth area of the dishwasher is

normally covered with a plinth run

matching the kitchen furniture.

The height ( ) of the plinth facia in front

of the dishwasher depends on the

plinth return ( ) and how much the

door front extends below the dish-

washer door ( ).

^ Place the plinth facia directly in front

of the kitchen run but do not attach.

^ Carefully open the dishwasher door.

If the door front comes into contact with

the kitchen plinth when the dishwasher

door is opened the plinth facia in the

area behind the dishwasher door needs

to be cut to size.

^ To do this mark where the edge of the

door front comes into contact with the

plinth facia.

^ Cut the plinth facia to size along this

line.

^ Place the plinth facia in front of the

kitchen run again and check whether

the dishwasher door can be opened

fully.

If it cannot, trim the plinth facia again

until to the correct size is achieved.

^ Secure the plinth facia to the adja-

cent kitchen units in accordance with

kitchen furniture manufacturer's in-

structions.

If your kitchen does not have a plinth

run matching the kitchen furniture, the

plinth area can be covered with a sepa-

rate plinth kit, available at extra cost

(special accessory).